7.50C Fixes error where Date Paid in Receiver Table was not being
7.xcJa-populated.
7.50D Fixes possible error 12 when entering a new receiver.
7.50E Fixes bug when duplicating BOM alternate partnumbers will now be 7.xcJa-transfered to duplicate.
7.50F Fixes BOM duplication bug that failed to carry over the reference 7.xcJa-designators.
7.50G Fixes failure of new part creation to populate the initial date.
7.50H Fixes error 107 when generating some reports by date\time range.
7.50J Fixes bug that switched the Yes/No buttons on option 46 in the
7.xcJa-settings and utilities.
7.50K Fixes bug when paying bills and the cheking balance must be
7.xcJa-manually entered.
7.50L Fixes bug that failed to pull in the vendor information for a PO when 7.xcJa-the part is being created from the PO screen.
7.50M Fixes printer bug that stops the printer between pages when running 7.xcJa-some reports.
7.50N Fixes cost calculation bug on the Inventory Value report.
7.50P Fixes inventory AUDIT bugs affect Type and LeadTime.
7.50Q Fixes part REV population bug in cloning sales orders.
7.50R Fixes ECN print bug.
7.50S Fixes accounting bug that erased current year budget figures.
7.50T Fixes Physical Inventory History bug during restore.
7.50U Fixes Serial Lot Tracking error when printing.
7.50V Fixes Fixes duplicate stock transaction number bug.
7.50W Fixes Fixes Employee Time sheet print error.
7.50X Fixes Fixes Alternate Currency bug that failed to reset the currency 7.xcJa-into the base currency on exit.
7.50Y Fixes bug on pick list and popup calls that would not allow focus 7.xcJa-navigation via the keyboard arrow keys.
7.50Z Fixes bug that failed to provide sort orders in scrolling for accounting 7.xcJa-transactions.
7.50AA Fixes bug that allowed access to the drop down menus while editing 7.xcJa-password information.
7.50AB Fixes bug that would only allow numbers to be entered for the serial 7.xcJa-number into the serial number master and detail tables.
7.50AC Fixes error 13 when deleting receiver records over X years old.
7.50AD Fixes bug that prevents the inspect report criteria from being
7.xcJa-instantiated.
7.50AE Fixes bug that caused the failure to print the Inspect.frx report to 7.xcJa-print.
7.50AF Fixes failure to insert default class into new inventory entry.
7.50AG Fixes Update Onorder/PO ratio bug,error 12 and 13 when entering a 7.xcJa-new address POs indexed by deldate for InfBkt.
7.50AH Added utility to purge unneeded revision update folders from disk.
7.50AJ Fixed bug when pressing F2 in the Sales Quote entry screen.
7.50AK Fixed date format on Employee timesheet and Inspection screens.
7.50AL Fixed Employee Time Tracking Module time spinner control.
7.50AM Fixed Audit Inventory function that rejected all images that did not 7.xcJa-reside within the BMP folder
7.50AN Fixed error 1102 when installing pc/MRP without a C: drive.
7.50AP Fixed "exclusive file rights" error when importing data.
7.50AQ Fixes OCX not registered bug.
7.50AR Fixes bug that would fail to correctly post an invoice or receiver with 7.60J - lower case alphas.
7.50AS Fixes BOM view and edit mode bug.
7.50AT Fixes Costed Inventory report sort by Last Po cost.
7.50AU Lined up columns on the sales analysis module book to bill report.
7.xcJa--Updated the copyright notice to include the year 2003.
7.xcJa--Fixed error 13 when the f1 key is pressed while on the purchase 7.xcJa-screen when the cursor is in the qty field and "always lookup pricing" 7.xcJa-is turned on.
7.xcJa--Fixed error 13 when the f1 key is pressed while on the sales screen 7.xcJa-when the cursor is in the qty field and "always lookup pricing" is 7.xcJa-turned on.
7.xcJa--Fixed in the movement report process that would fail to display the 7.xcJa-part number in the error message if an specified part number could not 7.xcJa-be found.
7.xcJa--Fixed error 13 bug when the itemno is edited on a work order. 7.xcJa--Fixed bug when entering "r", "o", or "s" accounting transactions that 7.xcJa-could erroneously put the first six characters of the customer po # 7.xcJa-into the vendor invoice field.
7.xcJa--Fixed bug that would set the size of the vendor invoice number field 7.xcJa-to 6 characters instead of 15.
7.xcJa--Changed read only image text box on partscr to false (was true). 7.xcJa--Corrected the formula in the sales commission report for
7.xcJa-inv - tax/frt/disc column and commission.
7.xcJa--Updated the internal product order form to reflect the new technical 7.xcJa-support contract business model.
7.xcJa--Show 8 decimal points for unit price in foreign currency on the sales 7.xcJa-order form.
7.xcJa--Fixed error 12 variable acountno not found when running all routing 7.xcJa-records for a customer.
7.xcJa--bar39str function will now convert numbers to strings 7.xcJa-generic.bar39str()
7.xcJa--Fixed bug that the importer screen has two buttons with the same hot 7.xcJa-key. importer.prg
7.xcJa--Correct the accounts receivable aging report so that it will always 7.xcJa-take the first line item invoice's dateship to avoid the credit memo date 7.xcJa-being used as the dateship.
7.xcJa--Fixed error 5, line 59 of sacmdscroll.click() (record out of range) bug 7.xcJa-that would occur when a scroll button is pressed when the active 7.xcJa-table is at end of file.
7.xcJa--Fixed error 1734 when a list used by a cbolistlookup or 7.xcJa-cbolistlookupcombo class doesn't exist in the lists.dbf table.
7.xcJa--Fixed bug where the sacmdscroll class would not move the record 7.xcJa-pointer back to the correct record in the original table.
7.xcJa--Added additional search locations for the windiff.exe file by the 7.xcJa-windiff() function.
7.xcJa--Fixed bug that using a user's access rights to the sn/lot module for 7.xcJa-the sales analysis module.
7.xcJa--Restored the fax number column to the address log report. The 7.xcJa-column was erroneously removed from the report beginning with 7.01.
7.xcJa--Fixed bug that says the quote is closed when scrolling to select an 7.xcJa-open sales quote with sort order other than document no for 7.xcJa-converting sales quote to sales order.
7.xcJa--Fixed bug that says the request is closed when scrolling to select an 7.xcJa-open purchase request with sort order other than document no for 7.xcJa-converting purchase request to purchase order.
7.xcJa--Added warning to get all users out of pcmrp and make a backup prior 7.xcJa-to updating.
7.xcJa--Fixed bug that did not update one of stocktra index file when entering 7.xcJa-i type stockroom transaction.
7.xcJa--Enhanced the environment dump function to also include the current 7.xcJa-record in each open table in the output.
7.xcJa--Added rate field into the emptimesh.dbf and populated it from the 7.xcJa-employee.dbf table when creating a new time sheet.
xxxx
7.60C Fixes send
reports to HTML option with multiple pages.
7.60D Fixes bug in WIP variance report that failed to group variations
of 7.xcJa-case for a partnumber together.
7.60E Fixes bug when creating a new Chart of Account.
7.60F Fixes bug when performing stockroom R type transaction that left
7.xcJa-behind shortages.
7.60G Fixes bug when running the Infinite Bucket MRP Timeline.
7.60H Fixes bug when printing BOM comments within the BOM editing 7.xcJa-screen.
7.60J - Fixes bug in QuickBooks® export
to correctly export the vendor 7.60J - 7.60J-address
so it prints correctly on checks.
7.60J -
Fixes Infinite Bucket PO items so the vendor for existing Purchase 7.60J
- Orders shows correctly.
7.60K Fixes
bug in QuickBooks export to correctly utilize the chart of
7.60J - 7.x6Ja- account numbers from QuickBooks.
7.60J -Fixes
fulfill shortage bug what would use the BOM not the sales
7.x6Ja- order multiplier.
7.60L -
Fixes bug in option 30 that would change the partnumber size
7.60M Fixes bug in inventory screen that failed to recalculate
the
7.x6Ja- ONDEMAND
quantity correctly.
7.60N Fixes bug in searching for alternate Model numbers.
7.60P Fixes OCX not registered bug.
7.60Q Fixes M type stockroom transaction serial number bug.
7.60R Fixes ECN custom report bug.
7.60S Fixes bug when returning unused part with sn/lot from wip.
7.60T Fixes bug on stockroom issue report that showed the wrong location.
7.60U Fixes bug when changing option 14 that would change other options
7.x6Ja-in
the Settings and Utilities.
7.60V Fixes bug when sending a shipper to e-mail.
7.60W Fixes bug "File in Use" when editing a GL transaction.
7.60X Fixes bug in Serial Lot Tracking reports calculation.
7.60Z Showed negative quantity for issuing and invoicing on the sndlog
7.xcJa-report.
7.xcJa--Fixed error 12 variable acountno
not found when running all routing
7.xcJa-records for a customer.
7.xcJa-
-bar39str function will now convert numbers to strings.
7.xcJa-
-Fixed bug that the importer screen has two buttons with the same
7.xcJa-hot
key.
7.xcJa-
-Correct the accounts receivable aging report so that it will always
7.xcJa-take
the first line item invoice's dateship to avoid the credit memo date
7.xcJa-being
used as the dateship.
7.xcJa-
-Modified backup program to automatically delete
7.xcJa-backupinprogress.flg
if > 6 hrs old, backup fpt files, eliminate
7.xcJa-lcsavedstime variable not
found error if backuptime.mem file is
7.xcJa-missing.
7.xcJa-
-Fixed error 5, line 59 of sacmdscroll.click() (record out of range) bug
7.xcJa-that would occur when a scroll button is pressed when the active
7.xcJa-table
is at end of file.
7.xcJa-
-Fixed error 1734 when a list used by a cbolistlookup or
7.xcJa-cbolistlookupcombo
class doesn't exist in the lists.dbf table.
7.xcJa-
-Fixed bug where the sacmdscroll class would not move the record
7.xcJa-pointer
back to the correct record in the original table.
7.xcJa-
-Modified the auditpart.prg to look for bom with upper case bom
7.xcJa-number.
7.xcJa-
-Fixed bug using a user's access rights to the sn/lot module for the
7.xcJa-sales
analysis module.
7.xcJa-
-Restored the fax number column to the address log report. the
7.xcJa-column
was erroneously removed from the report beginning with 7.01.
7.xcJa-
-Fixed bug that says the quote is closed when scrolling to select an
7.xcJa-open
sales quote with sort order other than document no for
7.xcJa-converting sales
quote to sales order.
7.xcJa-
-Fixed bug that says the request is closed when scrolling to select an
7.xcJa-open purchase request with sort order other than document no for
7.xcJa-converting
purchase request to purchase order.
7.xcJa-
-Added warning to get all users out of pcmrp and make a backup
7.xcJa-prior to
updating.
7.xcJa-
-Fixed bug that did not update one of stocktra index file when
7.xcJa-entering
i type stockroom transaction.
7.xcJa-
-Removed wip qty and word custphys from physical inventory
7.xcJa-variance report.
7.xcJa-
-Added rate field and populated it from the employee.dbf table when
7.xcJa-creating
a new time sheet.
7.xcJa-
-Fixed bug where a user with view-only right to the configuration
7.xcJa-setttings
& utilities area can make changes to an option or run a utility
7.xcJa-by
pressing the enter key.
(Call Software Arts, Inc. for full upgrade to version 7.80)
7.70B Fixes bug when viewing
a BOM and a sub-assembly is chosen, the 7.x6Ja-
mode was changed to
EDIT
7.70C Fixes bug when exporting receivers to QuickBooks
that would ask for 7.x6Ja- which
table to open.
7.70D Fixes bug when changing option 14 that would change other options
7.x6Ja-in
the Settings and Utilities.
7.70E - Fixed bug that did not allow Outside Labor to be exported correctly
7.x6Jxa-to QuickBooks.
7.xcJa-- Fixes Infinite Bucket
generation error.
7.x6Ja-- Fixes Excess Inventory
bug on standard MRP.
7.70F Fixes work order reports to exclude sales orders correctly.
7.70G Fixes R type stockroom transaction loop when receiving assemblies
7.xcJa- with labor items.
7.70H Fixes Inside/Outside Labor GL Transactions to QuickBooks.
7.70J Fixes error 13 when pressing F1 in the sale and purchase order enty.
7.70K Fixes Terms export to QuickBooks added NonInventory part types.
7.70L Export to QB uses deflt operating expense accnt for NA part numbers.
7.70M Added a feature to automatically make a backup
of the QuickBooks 7.xcJa- company
file before exporting to QuickBooks.
7.70N Fixes error #3 when editing a GL transaction.
7.70P Fixes QB Export bug that failed to export terms if it was over 15
7.xcJa- characters.
7.70Q Added a button in the Settings and Utilities to send all of the
settings
7.xcJa- to a text file.
7.70R Fixes QB Export bug that failed to load the QB default chart of
7.xcJa- accounts correctly.
7.70S Fixes bug that failed to mark unused parts for deletion during
7.xcJa- the where used report.
7.70T Fixes Account and Carry and Cash and Carry sales order entry
7.xcJa-Auto Accounting File in use error.
7.70U Fixes Serial Lot Tracking module that fails to allow users to enter
7.xcJa-serial numbers in sequence.
7.70V Fixes sales commission report formula.
7.70W Modified QB Export to require exclusive(Single User) rights when
7.xcJa-exporting.
7.70X Fixes looping issue with R type stockroom transactions.
7.70Y Fixes P type inventory adjustment method bug.
7.70Z Fixes Credit Memo and Sales Commission report issue.
7.70AA Fixes bug that occurs when scrolling for the Sales/Work order in
the
7.xcJa- time sheet entry screen.
7.70AB Fixes maximum potential build bug.
7.70AC Fixed error 12 variable 'ACOUNTNO NOT FOUND' when running all
7.xcJa- routing records for a customer.
7.70AD Minor program fixes & enhancements and Customer specific
7.xcJa-adjustments.
7.70AE Improved QB invoice credit check(noerrmsg)
and
7.xcJa-receiver date check(error 1429).
7.70AF Fixes chart of account number case sensitivity
when
7.xcJa- re-closing
a period.
7.72A-7.72K
(Beta Version - Call Software Arts, Inc. for full upgrade to version 7.80).
7.80C Fixes
chart of accoun bug in transact table.
7.80D Fixes stockroom all for a single transaction record
not found bug.
7.80E Fixes manually issue serial numbers bug.
7.80F Fixes manually issue serial numbers bug.
7.80G Fixes credit limit message bug in sales
screen.
7.80H Fixes maximum pontential build bug.
7.80J 'Convert Part to Assembly 'allows the spinner
to go negative.
7.80K Fixes Customer specific adjustments.
7.80L Minor program fixes & enhancements and
Customer specific
7.xcJa-adjustments.
7.80M Improved QB invoice credit check(noerrmsg)
and -receiver date
7.xcJa-check(error 1429)
7.80N Fixed Disrribution file set. BAR39STR function
converts numbers to
7.xcJa-strings.
7.80P Selecting Std Cost for the Audit Wip report resulted Average Cost
7.xcJa-and vise versa. Correct The Aging
Report & Credit Memo Date.
7.80Q Fixed failure to offer PDF output when generating accounting reports.
7.xcJa- Added the address scroll button for
the "A" type accounting
7.xcJa- transaction. Changed the stockroom
option "B" (transfer between
7.xcJa- areas) to allow transfer of decimal
values.
7.80R Fixed address print/sort capability. Fixed PartMaster import anomaly.
7.80S Fixed failure of the Check Availability report to factor in the
on
7.xcJa-demand if the Sub-Assembly Only option
was selected.
7.80T Modified the sales order billing and shipping address
lookups to take 7.xcJa-the billing\shipping
address from the selected address if it exists.
7.80U Modified the I accounting transact to show the amount
for the chart 7.xcJa-of account in the non
inventory item for the accounts payable
7.xcJa-voucher when accounting is set to
period.
7.xcJa-Modified the accounts payable voucher
to get the price from the 7.xcJa-selected
vendor.
7.80V Made audit part case insensitive for BOMs.
7.xcJa-Can debit QB COG accnts for freight
in and outside labor.
7.80W Fixed possible rounding differences between debits & credits
when
7.xcJa-entering a new accounting transaction
by explicitly rounding all
7.xcJa-debit & credit amounts to 2 decimal
places at the variable level.
7.xcJa--Fixed bug when converting part to
assemblies where the BOM's
7.xcJa-item# would not appear on the issue
report if the item had an
7.xcJa-insufficient qty in inventory and
the issue was not configured to
7.xcJa-automatically issue the required qty.
7.xcJa--Fixed bug that failed to allow an
inside labor part to be added to
7.xcJa-QuickBooks as a service item.
7.80X Custom Modification.
7.80Y Fixed bug using a user's access rights to the SN/Lot module for
the 7.xcJa-sales analysis module.
7.80Z -Enhanced the routing module to also trigger a return from mfg if
7.xcJa-material is transferred to any area
higher than finished goods to
7.xcJa-prevent the possiblity that material
would never be back flushed.
7.xcJa--Enhanced the routing module to block
transfer of material from the
7.xcJa-"finished goods" area or
higher into a lower area because it could
7.xcJa-result in a second back_flush of component
if the material is
7.xcJa-subsequently transferred back to finished
goods.
7.xcJa--Restored the fax number column to
the address log report. The
7.xcJa-column was erroneously removed from
the report beginning with 7.01.
7.xcJa--Fixed failure of the inspection report
criteria screen to offer pdf as an
7.xcJa-output option or to allow selection
of the html option.
7.xcJa--Added ability to output an inspection
record from the inspection edit
7.xcJa-screen in pdf and html formats.
7.xcJa--Added ability to output the inspection
requirement list to pdf, ascii,
7.xcJa-excel, dbf, and html.
7.xcJa--Infinite Bucket excess inventory
report now includes all items (those
7.xcJa-w/o excess) if you select all items.
7.xcJa--Fixed bug that says the quote is
closed when scrolling to select an
7.xcJa-open sales quote with sort order other
than document number for
7.xcJa-converting sales quote to sales order.
7.xcJa--Fixed bug that says the request is
closed when scrolling to select an
7.xcJa-open purchase request with sort order
other than document number
7.xcJa-for converting purchase request to
purchase order.
7.xcJa- -Fixed error when a users is reprinting
checks, elects to build the list
7.xcJa-manually, selects a non check type
transaction, then opts to skip the
7.xcJa-transaction when it is detected.
7.xcJa- -Added warning to get all users out
of pcmrp and make a backup
7.xcJa-prior to updating.
7.xcJa- -Changed the chart of accounts print
menu option to also allow
7.xcJa-output to pdf, ascii, excel, dbf,
and html.
(Beta Version - Call Software Arts, Inc. for full upgrade to version 7.90).
7.90C Custom work.
7.90D Fixed failure of the "Next Available Part Number for a Product" to 7.xcJa-return the correct next avaiable part number.
7.90E Improved diagnostic tracking of QB exports.
7.90F Close a loophole that could allow pc/mrp to attempt to send an invalid 7.xcJa-credit amount to QuickBooks which results in a pc/mrp error.
7.xcJa--Added code to automatically add a new field (payrate) to the 7.xcJa-emptimesh table during a manual update and populate the field with 7.xcJa-the current payrate for the employee.
cJa--Added rate field and populated it from the employee.dbf table when 7.xcJa-creating a new time sheet.
7.xcJa--Modified the enterstk.prg to calculate the average labor cost using 7.xcJa-the rate stored in emptimesh.dbf instead of employee.dbf for the 7.xcJa-stockroom labor records. 7.x
7.xcJa--Modified the cost of sale report to get the labor hourly rate from the 7.xcJa-emptimesh.dbf not employee.dbf.
7.xcJa--Corrected bug where the older version of msvcr70.dll (296kb) instead 7.xcJa-of the vfp7 version (336)
7.xcJa--Fixed bug when querying qb for part data that would return 7.xcJa-"Fullname is not an object" if a vendor had been assigned to an item 7.xcJa-then the vendor deleted from the vendor list.
7.xcJa--Modified findaccountingperiod.prg to automatically fill the 7.xcJa-closedat.dbf if the passing transaction date's year and month does 7.xcJa-not exist in the table.
7.xcJa--Fixed bug where a user with view-only right to the Configuration, 7.xcJa-Settings & Utilities area can make changes to an option or run a utility 7.xcJa-by pressing the enter key.