WebEx Support
17.12.1 WebEx Support Overview
Software Arts, Inc. now offers its customers that are on a Yearly Support Contract, the availability of receiving support via the following options:
· Logon to your computer to help you solve a problem with your pc/MRP data.
· Allow you to see the support person’s computer and see the steps to solve a problem.
· Training support using your computer and your data or the support person’s computer and test data.
17.12.2 Customer Receives a Support Email Request
When a customer requests support via WebEx, the support representative will send an email with the link to the Internet site for pc/MRP WebEx support.
webx010c
When the client receives the email, all he has to do is click on the supplied link.
17.12.3 WebEx Access without Email
Without email access, the customer must go to the following Internet address by opening an Internet explorer window and entering ‘pcmrp.webex.com’ (no quotes).
Webx011c
Optionally, you may go to
Configuration, About pc/MRP, and press Ctl-W. This
will bring up your browser and directly connect
to pcmrp.webex.com.
Pressing the enter key takes you to this secure
website for the WebEx session.
Webx012c
Either
method of getting to the pc/MRP WebEx portal
will present the next screen for pre-session information.
17.12.4 Pre-Session Form
After pressing the link, this session login form appears.
webx020c
The session number is already supplied if the customer came to this screen via an email link. If the customer has used WebEx before, the rest of the required information has been entered automatically.
17.12.5 WebEx for the First Time
However you get to the website for pc/MRP WebEx support, this screen appears if it is your first time using WebEx.
webx040c
The
client software for your browser must be downloaded and installed the first
time you run WebEx on a specific computer.
After pressing the ‘Download’ link, WebEx will present the customer with the
standard security screen for approval of the download.
webx050c
The
WebEx client software is certified and therefore should be allowed to continue.
Check the ‘Always trust…’ checkbox if you wish and then press the ‘Yes’ button.
The download and install takes a few minutes. The following screen should
appear:
webx06c
The download and install will take about 3-minutes and only occurs the first time you use WebEx on the current computer.
17.12.6 Logging into pc/MRP’s
After the 3 minute download, the customer sees:
webx07c
This screen will stay as is until the support representative selects a specific type of support control. Please do not leave the session. The type of control is agreed to in advance by the customer and the support representative.
For Desktop or Application control, there are four types of session controls:
1. Desktop
a. Request Desktop View — Request to view a customer's desktop.
b. Request Desktop Control — Request to control a customer's desktop.
c. Show Desktop View — Allow a customer to view your desktop.
d. Give Desktop Control — Give control of your desktop to a customer.
2. Application
- Request Application View—Click
to request to view a customer's application.
- Request Application Control—Click
to request to control a customer's application.
- Show Application View—Click
to allow a customer to view your application.
- Give Application Control—Click
to give control of your application to a customer.
NOTE: The customer will always be able to stop desktop sharing.
Almost finished with connecting; now the following screen appears:
webx080c
The customer needs to notice what kind of support connection he is approving; in this case, share control of desktop.
The customer then should check the ‘Grant permission…’ checkbox to stop prompting each time control of the desktop changes from customer to support representative and back. Then press the ‘OK’ button to start the support session.
17.12.7 pc/MRP’s Support Start
Now, the support begins. If application is chosen as a support connection, only the application’s window is visible to the support representative, as seen below.
webx09c
If Desktop support is chosen, the whole desktop with the above screen is visible to the support representative.
17.12.7 Stopping pc/MRP’s Support
When the session is terminated by the support representative, this screen appears and allows the customer to leave the support session.
webx10c
Press the ‘OK’ button.
If the customer ends the session by choosing ‘Stop Desktop Sharing, the screen will look like this:
webx110c
Press the’OK’ button to
continue.
Now press the ‘Leave Session’ button for either type of session termination.
webx120c
17.12.8 Session Feedback for pc/MRP’s Support
Finally, after the ‘Leave Session’ button is pressed, have the customer fill out the feedback form if they have the time.
webx130c
Please
fill out the information requested so that we may improve all future
interactive support of pc/MRP.
The final screen appears:
webx140c
The support session has disconnected with this last screen.
Webx160c
17.12.9 WebEx Errors
If you get an error message that a WebEx file does not exist
(webex330atpcap95.dll), follow the following instructions:
· Exit all programs.
· Open Windows Explorer.
· Select Tools.
· Select Internet Options.
· Select the General tab (if not already selected).
· Press the “Delete Cookies…” button; press the “OK” button.
· Press the “Delete Files…” button.
· In the “Delete Files…” sub-window that appears, check the “Delete all offline content” checkbox. Press the “OK” button.
· Press the “Clear History” button’
· Select the Security tab.
· With the Internet zone selected, press the “Custom Level…” button.
· “Enable” (or at least “Prompt”) the first five “Active-x controls and plug-ins”.
· Select the “Advance” tab.
· Press the “Restore Defaults” button.
· Finally, Press the “OK” button to exit the Internet Options window.